Pull nail also known as pull core rivet pull core pull nail, is a kind of single side riveting fasteners, but must use a special tool - pull nail gun riveting.
Among them, the flat circular head core-pulling nail with open mouth is the most widely used, the countersunk head core-pulling nail is suitable for riveting occasions with smooth performance, and the closed core-pulling nail is suitable for riveting occasions with high load and certain sealing performance.

Pull nail specification:
The usual specification is 3.2, 4, 4.8, 5, 6.4 (aluminum can be added 2.4 and 3 series.) five series.
Nail core length is 11 series 8-8.5-9.5-11-12-12.5-13-14.5-155-16-18-21
The market length is 22-- 25-- 30-- 40
Stainless steel material 3.2 diameter technology can achieve 16mm long
4 diameter can be up to 25mm long
4.8 with a diameter of 40mm can be achieved, but it is seldom used, and 30mm is rarely used.
The 6.4 diameter and 4.8 diameter can be about 40mm long
The market length of the closing flat round head puller (GB12615) can be increased by 5.5 6 lengths.
The drawing nail is generally 4.8*10/14 6.4*14/16/19
Copy paper independent packaging +PE bag + carton packaging shipping.
 
Tiansheng has been developing and producing fasteners professionally for 12 years. Welcome to customize your products.